We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.
Bottle Cap Jig Knobs
I’m always trying to use up scraps and stuff that would otherwise end up in the trash. My latest devices are jig knobs made with plastic bottle caps, which have a grippy surface on their edges. To make these knobs, all you need are plastic caps, 1/2” thick plywood, carriage bolts and epoxy.
First, cut plywood discs to fit in the caps using a hole saw. Next, counterbore the plywood disk with a Forstner bit large enough for the bolt’s head. Then, drill a hole all the way through the disc and slide the bolt through. Finally, spread epoxy around the inside of the plastic cap, and place it on the disc/bolt assembly. Make sure you put epoxy in the counterbored area around the bolt’s head. —Serge Duclos
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.